2009 Street Challenge Champion – Mark Washington |
|
Street Challenge is a heads-up class designed for street driven muscle cars and late model factory hotrods with affordability in mind. With only minor modifications, a single power adder and a set of “TRUE” street radial tires and you got one of the toughest classes to tame. |
|
Street Challenge Class Guidelines STARTING LINE: Street Challenge will be utilizing a 4/10th’s Pro Tree Starting System ELIMINATION LADDER: Pro Ladder BODY: The car must retain it’s original appearance and profiles. LETTERING / DECALS: Car lettering is limited to windows only. Right Lower corner of Windshield is reserved for Class Sponsor (K&N Filters) and Left Lower for Series Sponsor (Chassisworks) A PSCA Oval decal must be placed on each side of every car in a visible location before entering the tech area.. FIREWALL: Must retain factory unaltered firewall, in factory location. A cosmetic overlay is permitted. INTERIOR / SEATS: Covered door panels, carpet and dashboard are required. Aftermarket front seats that have upholstery or covered are permitted. Factory rear seats can be deleted with carpet overlay. BRACKET RACING AIDS: The use of bracket racing aids such as optical sensors, delay boxes, stutter boxes, and throttle stops are prohibited. CHASSIS / SUSPENSION FRAME & CHASSIS: Stock front frame rails must be retained, rear frame rails may be notched (Not Moved) for tire clearance FRONT SUSPENSION: All cars must retain factory stock-type suspension. Front frame rails, radiator core support, and inner fender sheet metal must remain in stock location (trimming for header clearance permitted). Aftermarket tubular control arms, coil over kits, or OEM front strut retrofits are permitted. But must be a direct bolt on, no welding modifications permitted. Aftermarket Racing Struts with spindle mounts or hub mounts designed for tube type front ends are prohibited. Stock wheelbase will be enforced on all vehicles. Factory sway bar may be removed. K-MEMBER: Aftermarket replacement bolt on K-Members are permitted. REAR SUSPENSION: All cars must retain stock rear suspension. Bolt on traction devices are permitted. Leaf spring relocation kits permitted for tire clearance only. No rear coil-over conversions permitted. Mini-tubs or modifications to the factory wheel tubs is permitted. Factory sway bar may be removed. WHEEL BASE: Must retain stock wheel base with a maximum variation right to left and front to back of one inch. WHEELIE BARS: Wheelie bars prohibited DRIVE TRAIN AUTOMATIC TRANSMISSIONS: No Restrictions MANUAL TRANSMISSION: No Restrictions ALL WHEEL DRIVE: Not permitted. REAR END: Factory type rear end only. Housing may not be altered or shortened. No IRS conversions to solid axles. AIR FILTER: All air entering carburetor or throttle body must pass through an automotive type air filter (K&N type Air Filters are permitted) ENGINE MOUNT LOCATION: Engine must remain in stock location…Engine mounts may be solid. EXHAUST: Production type mufflers are required. No collector inserts permitted. Modification or removal of muffler internals is prohibited (no gutting). FUEL / FUEL SYSTEMS: The PSCA reserves the right to check fuel at any time. Gasoline is the only fuel permitted. Fuel Cells OK. Mechanical and electric fuel pumps, pressure regulators, and any line size are allowed. RADIATOR: An automotive-type radiator is required. POWER ADDER SINGLE POWER ADDER ONLY: Any single type power adder is legal. You can have as many nitrous systems (but not in combination with blower or turbo) You can have twin turbochargers (but cannot add a nitrous system in conjunction) STREET LEGAL REQUIREMENTS HEADLIGHTS & TAILLIGHT: All entries are required to have working headlights and tail light (headlights doors must be fixed open or work manually or automatically on cars so equipped). Brake lights, turn signals are not required. TIRES: Front tires must be DOT Approved and have a minimum tread width of 4.5 inches. Rear tires must be a true “off the shelf” radial tire with a minimum tread rating of “180”. Tire size is based off a P255/60 R15. 16-18in “off the shelf” radials permitted but cannot exceed the following dimensions: 10.25″ section width, 8.2″ tread width, 27.0″ overall diameter. The tread of these tires must not protrude outside the body line at the top of the tire. If your car came from the factory with a tread rating lower than 180, bring factory info on the tires with proof tires came with vehicle. |